Woodberry News All things concerning Antiques

bristol finish teak

The marine varnishes have been used to protect and preserve the forests on yachts for many years. History is witness that coatings applied in 1700 are very similar to what is used today. Requests for the appeal of wood to be seen even time providing protection against the elements. Finishing reached after careful will be diverted to a soft patina, glossy varnish like fine furniture.

Assuming that you want to protect and beautify brighter than the exterior of your boat, how to choose between the amazing diversity products? Knowing that it is equally discuss the benefits of yachts Powered compared to sailboats, but the following observations:

What a facet?

A finishing polish is a liquid commonly used to treat wood. Its main components are oils. resins, solvents, dryers and ultra-violet additives. The components are mixed in varying amounts to give the best appearance and protection.

Oils Wood

The oils are generally retained its original appearance and texture of teak over other finishes, for entering deep into the wood fibers and does not create a surface finish. The oils are available in the color range of clear water to gold to brown dark. As with all finishing in teak, many coats tend to result in a much more coherent and complete old. We learn of oil are the easiest to use, since blemishes are not as evident in the results. This does not mean, however, that the application of four layers of teak oil to run rough a great ending. You'll also see that the consistency of thin oil zones means that masking protect the gel coat and painted on the adjacent areas as crucial for oil as the glaze. Clean, sand, teak with oil layers will give your teak 3-6 months of protection and beauty.

Tung oil is one of the applications most commonly used in teak.

Spar Varnish

Spar or marine varnish is a complex product consisting of oil, solvents and thinners, resins, driers and additives. By varying the proportions of components and mixing UV inhibitors and various secret ingredients, manufacturers create coatings showing very different characteristics. The varnish may have a high gloss or matte looks can be produced to be extremely difficult for areas to High attendance and may vary in color.

The 2 most common types of varnish are natural resin varnish, such as oil and tung oil modified polyurethane varnish. Natural varnish Tung oil is ideal for use indoors or outdoors and provide the traditional look golden teak. Polyurethane oil, they tend to be lighter, allowing the color of teak wood to shine through.

Coatings newer, offer better durability in the worst environments, like a hot sun in Florida. Movements teak because it is an ancient living plant, it expands and contracts, even small fluctuations in temperature and humidity. The best varnish to cope with this unstable material Use high quality oils and wood resins, and a higher percentage of solid ingredients, offering a more sustainable, elastic coating with superior brightness.

The number of layers is everything. Six to ten layers is often necessary to have a vision of quality. A layer of solid, carefully each year with maintenance coats will give you the ultimate onset, duration of service and protection. Despite the initial effort (up to 10 layers are common) is not better teak outdoor gloss finish varnish.

Interlux Original 90 is not only a variety of traditional Spar varnish on the market.

Synthetic Wood Finishes

These coatings gained popularity with cruise ships in Florida and the Bahamas in search of UV resistant, low maintenance light. Formulated for ease and speed These finishes have a rare moment for outdoor use, easy to apply and show relatively good. Some Spar varnish, such as Interlux Goldspeed and the schooner made without pigment, like the beauty of teak house. The brightness and depth cons convenience is the subject of compromise with these products, but the simplicity and Labor savings can more than compensate. The application of synthetic finish is similar to teak oil, where you can sit directly on sand teak cleaning.

Cetol comes in four varieties, naturally, again to allow a more golden color, like the real aspect premium teak. Coat of the other products Cetol pigmented gloss with a shiny exterior finish.

I know a professional who uses only Cetol and her work is fabulous.

Two part urethane finishes in teak

Another product to make an appearance in the world of cruising Polyurethane finishes are in two parts. Designed to replace the varnish Traditionally, these products have left their mark on the sailing community. Its leaders produce these finishes to survive for years in tropical conditions in the hour. A manufacturer C Marine Technology, the sport's Bristol The final product is used in many cruises, certifying its beauty and durability.

Mike Dickens the author, owns a boat cruise.

Paradise Yachts is a Yacht Brokerage offering used yachts to customers worldwide.

Visit our website to view our selection of Used Trawlers, Motor Yachts, and Sailboats.

National and international sales. We ship Used Yachts and Boats worldwide. Located in Florida, USA. 904/556-9431